EG5200 Industrial Edge Computing Gateway

Home / Products / EG5200 Industrial Edge Computing Gateway

Highlight Features

Robustel’s EG5200 is a new generation of industrial edge computing gateway supporting global 4G/3G/2G networks for cellular backhaul, with a fully-fledged Debian 11(bullseye) based operating system able to support thousands of existing or new ARMv8 (Raspberry Pi compatible) based applications.

EG5200 supports Docker for easy deployment of applications and benefits from ‘RobustOS Pro’ – Robustel’s latest operating system with enhanced cybersecurity, advanced GUl and a myriad of software features including VPNs, Smart Roaming, SMS remote control and more.

With a quad core 1.6 GHz Cortex A53 CPU and an integrated NPU of 2.3 TOPS that greatly accelerate machine learning inference, EG5200 will take the compute power to the next level, best for the edge computing and edge Al applications, can also be used as a combination of cellular router +embedded PC in all the industrial filed.

RCMS is Robustel’s device monitoring service that is fully compatible with the EG5200. lt allows customers to see a location overview of their routers quickly and simply on a map plus features such as data usage, signal strength, current network and much more can then be viewed on a perrouter/gateway basis. Over-the-air updates are supported for Firmware, router configuration and Apps serving as essential “insurance” if anything was not quite right during deployment.

key features

  • Highly stable 4G/3G/2G cellular connectivity with global band coverage
  • High performance compute engine with 1.6 GHz CPU +32 GB eMMC Flash for running complex applications
  • Wireguard/IPsec/OpenVPN/GRE/L2TP/PPTP/DMVPN +more VPN options
  • Docker’ containerization supported
  • 5 x 1000Mbps Ethernet ports
  • 2 x USB3.0 Type A, 1 x USB2.0 Type C
  • 1 x HDMI
  • 1 x Console serial in RJ45 socket for debugging
  • 802.11ax Wi-Fi (optional) supporting AP and Client modes
  • BLE 5.3 compliant (optional)
  • 2 x RS232/RS422/RS485 (software configurable) ports for connection to industrial/legacy devices
  • 2 x DI & 2 x Relay Output for simple monitoring and control
  • Dual SlM card slots for redundant communications
  • Supports C, C++, Java, Python, Node, js etc. for users to develop their own applications
  • More than 50,000 applications from Debian repository currently available

Specification

  • Hardware System
    • CPU: Quad core Cortex-A53, 1.6 GHz
    • NPU: 2.3 TOPS
    • RAM: 4 GB DDR4
    • Flash: 32 GB eMMC
  • Cellular Interface
    • Version: 4G
    • Number of antennas: 3
    • Connector: SMA-K
    • SIM: 2 x Mini SIM (2FF)
  • Ethernet Interface
    • Ports: 5 x RJ45, 10/100/1000Mbps, Compliance with 1000BASE-T, LAN or WAN
    • Magnet isolation protection: 1 KV
  • Serial Interface
    • Type: 2 x RS232/RS422/RS485 (software configurable)
    • Connector: 2 x 5-pin 3.5 mm terminal block
    • ESD protection: 8 KV Air, 4 KV Contact
    • Baud rate: 300 bps to 115200 bps
    • Signal: RS232: TXD, RXD, GND, CTS, RTS; RS485: Data+ (A), Data- (B), GND; RS422: RX+, RX-, TX+, TX-, GND
  • Console Interface
    • Ports: 1 x RS232
    • Connector: RJ45
    • Baud rate: 115200 bps
    • Signal: TXD, RXD, GND
  • DI Interface
    • Ports: 2 x Dl, wet contact
    • Connector: 4-pin 3.5 mm terminal block
    • Isolation: Bi-directional optocoupler
    • Absolute maximum VDC: #ERROR!
    • Absolute maximum ADC: 100 mA
    • Signal definition: DI1+, DI1-, DI2+, DI2-
  • Relay Output Interface
    • Ports: 2 x Relay Output
    • Connector: 6-pin 3.5 mm terminal block
    • Absolute maximum VDC: #ERROR!
    • Absolute maximum ADC: 100 mA
    • Signal definition: NC1, NO1, COM1, NC2, NO2, COM2
  • USB Interface
    • Ports: 2 x USB 3.0 (HOST), Type A, 5V 900mA; 1 x USB 2.0 (OTG), Type C
  • GNSS Interface
    • Number of antennas: 1
    • Connector: SMA-K
  • WiFi & Bluetooth (Optional)
    • Wi-Fi: 2.4 GHz/5 GHz, 2 x 2 MU-MIMO, IEEE 802.11 a/b/g/n/ac/ax
    • Bluetooth: BLE 5.3 compliant
  • HDMI
    • HDMI: 1 x HDMI 2.0
  • Others
    • SD: 1 x microSD
    • Reset button: 1 x RST
    • LED indicators: 1 x RUN, 1 x MDM, 2 x USR, 1 x Signal, 1 x VPN
    • Watchdog: External
  • Software (Basic features of RobustOS Pro)
    • Network protocols: PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, DNS, NTP, SMTP, Telnet, VLAN, HTTPs, ARP, NTP, SMTP, Telnet, VLAN, SSH2, DDNS, etc.
    • VPN tunnel: IPsec, OpenVPN, GRE, L2TP, PPTP, DMVPN
    • Firewall: DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control
    • Remote management: Web, CLI, SMS
    • Serial port: Transparent, TCP Client/Server, UDP, Modbus RTU Gateway
    • Others: Smart Roaming v2*, etc.
  • SDK
    • Operating System: RobustOS Pro (Based on Debian 11 bullseye)
    • Supported programming languages: C, C++, Python, Java, Node.js, etc. (for users to develop own applications)
    • Debian Repository available
    • Flash available for SDK: 30 GB
    • RAM available for SDK: 2.5 GB
  • App Center (Available Apps for RobustOS Pro)
    • Apps*: Language, RCMS, WireGuard, etc.
  • Power Supply and Consumption
    • Connector: 2-pin 3.5 mm terminal block with lock
    • Input voltage: 9~60V DC
    • Power consumption: Idle: 6.2 W@12 V, Max: 14.6 W@12 V
    • Recommended power supply: 24 V DC/2 A Power Adapter
  • Physical Characteristics
    • Ingress protection: IP30
    • Housing & Weight: Metal, 622g
    • Dimensions: 58 x 111 x 128 mm
    • Installations: Desktop, wall mounting and 35 mm DIN rail mounting
    • Operating temperature: -30 ~ +70°C
    • Storage temperature: -40 ~ +85°C
    • Relative humidity: 5 ~ 95% RH
  • Regulatory and Type Approvals
    • Environmental: RoHS2.0
    • EMI: EN 55032 Conducted Emission Class B, EN 55032 Radiated Emission Class A
    • EMS: EN 61000-3-2 (Harmonic Current), EN 61000-3-3 (Voltage Flicker), EN 61000-4-2 (ESD) Contact Level 3, Air Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-11 (Dips) Class 3