R5010 High Speed 5G Router

Home / Products / R5010 High Speed 5G Router

Highlight Features

The R5010 is Robustel’s new 5G capable router supporting global 5G, 4G and 3G bands. The R5010 leverages our tried and tested high performance RobustOS 5 – an Operating System developed in-house by Robustel that has passed extensive 3rd party penetration testing.

R5010 is compatible with 3GPP Release 16 and targeted at the following applications:

Primary Broadband – Cellular network operators can now provide unlimited 5G tariffs at very reasonable prices. For many, a chance to cut the cables and use a wireless internet connection can be technically or commercially favorable.

SD-WAN – whilst many appliances have cellular options built-in, the R5010 can offer a very low-cost way to add a 5G backup route & by virtue of being able to located externally to the appliance, is more likely to get a good 5G signal!

RCMS is Robustel’s free router monitoring service that is fully compatible with the R5010. It is an extremely polished piece of software hosted on MS Azure & available as a privately hosted instance.

key features

  • Low cost industrial 5G Router
  • Global 5G/4G/3G cellular connections
  • Cutting-edge 5G 3GPP Release 16 cellular interface
  • 1 x 1000Mbps Ethernet port
  • PoE-PD, compatible with IEEE 802.at standard
  • USB modem mode supported
  • Fully programmable Operating System with a well-documented SDK
  • Multiple VPN options available including DMVPN, IPsec, L2TP + more…
  • Free cloud management platform – RCMS
  • Robust metal enclosure with small footprint – DIN-rail + wall mount options

Specification

  • Cellular Interface
    • Number of antennas: 4 (ANT0 + ANT1 + ANT2 + ANT3)
    • Connector: SMA-K
    • SIM: 2 x Mini SIM (2FF)
  • Ethernet Interface
    • Number of ports: 2 x 10/100/1000 Mbps, 2 LAN by default, can be configured as 1 WAN + 1 LAN
    • Isolation protection: 1 KV
  • WiFi Interface
    • Number of antennas: 2 (WiFi1 + WiFi2)
    • Connector: RP-SMA-K
    • Standards: 802.11 a/b/g/n/ac, 2 x 2 MIMO, supports AP and Client modes
    • Frequency bands:
      • 2.412 – 2.472 GHz (2.4 GHz ISM band)
      • 5.15 – 5.825 GHz (5 GHz ISM band)
    • Security: WPA, WPA2, WEP, WPA3
    • Encryption: AES, TKIP, WEP64
  • Serial Interface
    • Number of ports: 1 x RS232 or 1 x RS485 (Software configurable)
    • Connector: 1 x 3-pin 3.5 mm female socket
    • ESD protection: ±8 KV air discharge, ±6 KV contact discharge
    • Baud rate: 300 bps ~ 115200 bps
    • Signal definition:
      • RS232: TXD, RXD, GND
      • RS485: Data+ (A), Data- (B), Ground (GND)
  • GNSS Interface (Optional)
    • Number of ports: 1
    • Connector: SMA-K
    • GNSS Frequency:
      • GPS: L1, L5
      • QZSS: L1, L5
      • Galileo: E1, E5a
      • GLONASS: L1OF
      • BDS: B1
  • Others
    • Reset button: 1 x RST
    • LED indicators: 1 x RUN, 1 x Modem, 1 x USR, 1 x RSSI, 1 x Wi-Fi 2.4G, 1 x Wi-Fi 5G
    • Watchdog: External
  • Software (Basic features of RobustOS)
    • Network protocols: PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, HTTPs, DNS, ARP, SSH2, DDNS, etc.
    • VPN tunnel: IPsec, OpenVPN, GRE, WireGuard
    • Firewall: DMZ, anti-DDoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control
    • Management: Web, CLI, SMS
    • Serial port: Transparent, TCP Client/Server, UDP, Modbus RTU to TCP
    • Others: Smart Roaming v2, etc.
  • SDK
    • Supported programming languages: C, C++
    • Flash available for SDK: 5 MB
    • RAM available for SDK: 128 MB
  • App Center (Available Apps for RobustOS)
    • Apps*: L2TP, PPTP, DMVPN, VRRP, QoS, SNMP, Language, RCMS, Dynamic Route, Captive Portal, WLAN Multi AP
    • *Upon request. For more Apps please visit www.robustel.com.
  • Power Supply and Consumption
    • Connector:
      • B098004: 2-pin 3.5 mm female socket with lock
      • B098005: 4-pin Industrial DC Power Socket
    • Input voltage: 12/24 V DC, 12 ~ 36 VDC
    • Power consumption:
      • Idle: 2.9 W@12 V
      • Max: 10.9 W@12 V
    • Recommended power supply: 12V DC/1.5A Power Adapter
  • Physical Characteristics
    • Ingress protection: IP30
    • Housing & Weight: Aluminum, 475 g
    • Dimension: 136 x 115 x 32 mm
    • Installations: DIN rail mounting, desktop or wall mounting
    • Operating temperature:
      • -20 ~ +55°C (Normal temperature)
      • -25 ~ +70°C (Extended temperature)
    • Storage Temperature: -40 to +85°C
    • Relative Humidity: 5 to 95% RH
  • Regulatory and Type Approvals
    • Environmental: RoHS2.0
    • Physical Features:
      • IEC 60068-2-6 (Sinusoidal Vibration)
      • IEC 60068-2-64 (Random Vibration)
      • IEC 60068-2-27 (Mechanical Shock)
    • EMI:
      • EN 55032 Conducted Emission Class B
      • EN 55032 Radiated Emission Class B
    • EMS:
      • EN 61000-3-2 (Harmonic Current)
      • EN 61000-3-3 (Voltage Flicker)
      • EN 61000-4-2 (ESD) Contact Level 3, Air Level 3
      • EN 61000-4-3 (RS) Level 3
      • EN 61000-4-4 (EFT) Power Ports Level 2, Signal Ports Level 3
      • EN 61000-4-5 (Surge) Line to line Level 3, Line to ground Level 3
      • EN 61000-4-6 (CS) Level 3
      • EN 61000-4-11 (Dips) Class 2