This powerful LTE Cat 6 cellular router is designed for professional applications requiring reliable, fast connection and high data throughput. The RUTX11 is equipped with four Gigabit Ethernet ports, AC Wi-Fi, Bluetooth LE, and is EN 45545-2-certified, making it approved for use in passenger trains across Europe.

• Mobile
  • Mobile Module: 4G LTE Cat 6 up to 300 DL/ 50 UL Mbps; 3G up to 42 DL/ 5.76 UL Mbps
  • 3GPP Release: Release 12
  • SIM Switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
  • Status: IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • USSD: Supports sending and reading Unstructured Supplementary Service Data messages
  • Black/White List: Operator black/white list (by country or separate operators)
  • Multiple PDN: Possibility to use different PDNs for multiple network access and services
  • Band Management: Band lock, used band status display
  • SIM Idle Protection Service: When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning no data is used on the card until then
  • SIM PIN Code Management: SIM PIN code management enables setting, changing, or disabling the SIM card’s PIN
  • APN: Auto APN
  • Bridge: Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough: Router assigns its mobile WAN IP address to another device on LAN
• Wireless
  • Wireless Mode: 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
  • Wi-Fi Security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
  • SSID/ESSID: ESSID stealth mode
  • Wi-Fi Users: Up to 150 simultaneous connections
  • Wireless Connectivity Features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
  • Wireless MAC Filter: Allowlist, blocklist
  • Wireless QR Code Generator: Once scanned, a user will automatically enter your network without needing to input login information
  • TravelMate: Forward Wi-Fi hotspot landing page to a subsequent connected device
• Bluetooth
  • Bluetooth 4.0: Bluetooth low energy (LE) for short range communication
• Ethernet
  • WAN: 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
  • LAN: 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
• Network
  • Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
  • Network Protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
  • VoIP Passthrough Support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall: Port forward, traffic rules, custom rules, TTL target customization
  • Firewall Status Page: View all your firewall statistics, rules, and rule counters
  • Ports Management: View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
  • Network Topology: Visual representation of your network, showing which devices are connected to which other devices
  • Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and optionality to upload and download customized hotspot themes
  • DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
  • QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol, or port, WMM, 802.11e
  • DDNS: Supported >25 service providers, others can be configured manually
  • DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
  • Network Backup: Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
  • Load Balancing: Balance Internet traffic over multiple WAN connections
  • SSHFS: Possibility to mount remote file system via SSH protocol
  • VRF Support: Initial virtual routing and forwarding (VRF) support
  • Traffic Management: Real-time monitoring, wireless signal charts, traffic usage history