S6000U Multifunctional Smart Sensor

Home / Products / S6000U Multifunctional Smart Sensor

Highlight Features

  • An all-in-one sensor capable of collecting multiple on-site environmental data points, offering a cost-effective solution to streamline deployment expenses
  • Support for the Modbus protocol, facilitating seamless software integration for system integrator
  • Pre-configured alarm threshold parameters for early risk detection and accident prevention
  • Non-intrusive installation, easy todeploy and maintain
  • A fully industrial-grade design suitable for:
  • Industrial equipment operation monitoring
  • Production environment monitoring
  • Electrical cabinet environment monitoring
  • Elevator car operation monitoring
  • Power distribution room environment monitoring
  • Warehouse environment monitoring

Specification

  • Temperature Sensor
    • Range: -20~+70°C
    • Accuracy: ±1.5°C
    • Resolution: 14 bit
  • Humidity Sensor
    • Range: 5%~95%RH
    • Accuracy: ± 3% RH
    • Resolution: 14 bit
  • Atmospheric Pressure Sensor
    • Range: 26000~126000 Pa
    • Accuracy: ±10 Pa
  • Light Sensor
    • Range: 0 ~ 64000 Lux
    • Light Level: 1/2/3/4/5
    • Resolution: 16 bit
  • Noise Sensor
    • Range: 0~120 dB SPL
    • Sensitivity: -26 DBFS (Typical)
    • Resolution: 16 bit
  • Acceleration Sensor
    • Range: -2~+2 g
    • Accuracy: ± 0.4 m/s² (Typical)
    • Resolution: 16 bit
  • Distance Sensor
    • Range: 4cm ~ 360cm
    • Accuracy: ± 20mm (Dark Environment)
  • Tilt Sensor
    • Range: 0~90°
    • Accuracy: ±2°
  • Serial Interface
    • Type: 1 x RS485
    • Signal: A, B, GND
    • Baud rate: 9600/38400/57600/115200 bps
    • Connector: 4-pin 3.5mm female terminal (shares the same connector as the power supply)
    • Data Transfer Protocol: Modbus
  • LED
    • Number of LEDs: 2 Monochrome Indicators
    • LED Indicator Definition: Blue (RUN), Red (ERROR)
  • Button
    • Number of buttons: 2
    • Signal definition: RST, ISP
  • Power Supply and Consumption
    • Input voltage: 9 ~ 24 VDC
    • Signal definition: VIN, GND
    • Connector: 4-pin 3.5mm female terminal (shares the same connector as the serial interface)
  • Physical Characteristics
    • Ingress protection: IP31
    • Housing & Weight: Plastic (PC+ABS), 30.5g
    • Fire Protection Rating: UL94 V-0
    • Dimension: 76*37*21.5 mm
    • Installation: Bonding with 3M double-sided tape
    • Operating temperature: -20 ~ +70 °C
    • Storage temperature: -40 ~ +85 °C
    • Relative humidity: 5 ~ 95% RH non-condensing
  • Regulatory and Type Approvals
    • Approval: CE, FCC, UKCA, RCM
    • Environmental: RoHS2.0, WEEE