LG5100 uses RobustOS Pro IoT gateway operating system. RobustOS Pro is developed by Robustel based on Debian 11 (bullseye), a common Linux operating system, more convenient for customers to develop edge computing applications by themselves according to their needs, supporting programming languages such as C, C++, Python, Java, Node.js etc., and the latest common APPs can be downloaded in RCMS to fully meet the needs of fragmented IoT applications.

LG5100 supports Docker for easy deployment of applications and benefits from ‘RobustOS Pro’ – enhanced cybersecurity, advanced GUI and a myriad of software features including VPNs, Smart Roaming, SMS remote control and more.

RCMS is Robustel’s free router monitoring service that is fully compatible with the LG5100. It allows customer to see a location overview of their routers quickly and simply on a map. Features such as data usage, signal strength, current network and much more can then be viewed on a per router basis. Over-the-air updates are supported for Firmware, router configuration and Apps serving as essential “insurance” if anything was not quite right during deployment.

• Supports global LoRaWAN frequency bands
  
• Compatible with LoRaWAN and private protocols
  
• ‘Docker’ containerization supported
  
• Supports embedded LoRaWAN network server
  
• Up to 8 channels supports receive data simultaneously
  Supports Packet Forwarder Version 2.2.1 and Packet Forwarder Protocol Version 1
  
• Rich interfaces with 2x RS232/ RS485(software configurable), 2 x DI, 2 x DO
  
• Dual SIM cardredundant back-up with embedded 4G wireless communication module
  
• Cellular WAN, Ethernet WAN,link backup and ICMP detection
  
• RobustOS Pro + SDK + Apps
  
• Robust industrial design (9 to 60V DC input voltage, support desktop, wall mounting or rail mounting)
  
• Supports RCMS – Robustel’s router/gatewaymanagement platform for effective management of large estates of devices

• Hardware System
  • CPU: ARM Cortex-A7, 792MHz
  • RAM: 512 MB DDR3
  • Flash: 8 GB eMMC
• Cellular Interface
  • Number of antennas: 2
  • Connector: SMA-K
  • SIM: 2 x Mini SIM (2FF)
• FXS
  • Number of ports: 1
  • Connector: 2-pin 5.08mm terminal block
  • Signal: TIP, RING
• Ethernet Interface
  • Ports: 2 x RJ45, 10/100Mbps, LAN or WAN, 1 KV magnet isolation protection
• Serial Interface
  • Type: 1 x RS232, 1 x RS485 + 1 x CAN
  • Connector: 3.5 mm terminal block
  • ESD protection: 8 KV Air, 4 KV Contact
  • Baud rate: 300 bps to 115200 bps for RS232/RS485, up to 1Mbps for CAN
  • Signal:
    • RS232: TXD, RXD, GND
    • RS485: A, B, GND
    • CAN: CAN_H, CAN_L, GND
• DI/Relay Interface
  • Number of ports: 4 x DI(Wet contact) + 1 x Relay(Dry contact)
  • Connector: 3.5 mm terminal block
  • Absolute maximum VDC: #ERROR!
  • Absolute maximum ADC: 100 mA (DI), 300mA (Relay)
  • Signal definition:
    • DI1+, DI1-, DI2+, DI2-, DI3+, DI3-, DI4+, DI4-
    • NC, NO, COM
• WiFi Interface (Optional)
  • Number of antennas: 2
  • Connector: RP-SMA-K
  • Standards: 802.11a/b/g/n/ac, 2 x 2 MIMO, supports AP and Client modes
  • Frequency bands: 2.4 GHz/5 GHz
• Bluetooth Interface (Optional)
  • Number of antennas: 1 (Multiplexing Wi-Fi antenna)
  • Connector: RP-SMA-K
  • Standards: Bluetooth 2.1 and 3.0+Enhanced Data Rate (EDR) + Bluetooth 5.2
• Others
  • Reset button: 1 x RST
  • Switch: 1 x Battery Switch
  • USB: 1 x USB 2.0 (host), Type A, 5V, 500mA
  • LED indicators: 1 x Battery, 1 x RUN, 1 x Line, 1 x MDM, 1 x RSSI, 1 x Cloud, 1 x Device
  • Watchdog: External
• Battery
  • 1. Battery holder for 2 x 18650 lithium batteries (not included by default).
  • 2. Device is only compatible with 18650 (flat top) type of lithium batteries.
  • 3. If using a single battery, install it in position 1.
  • 4. Improper installation or use of incorrect batteries may damage the device and void warranty.
• Network Protocols
  • PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, DNS, NTP, SMTP, Telnet, HTTPs, ARP, VLAN, SSH2, DDNS, etc.
• VPN Tunnel
  • IPsec, OpenVPN, GRE, L2TP, PPTP, DMVPN, Wireguard*
• Firewall
  • DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control
• Remote Management
  • Web, CLI, SMS
• Serial Port
  • Transparent, TCP Client/Server, UDP, Modbus RTU Gateway
• SDK
  • Operating System: RobustOS Pro (Based on Debian 11(bullseye))
  • Supported programming languages: C, C++, Python, Java, Node.js, etc. (for users to develop own applications)
  • Debian Repository available
  • Flash available for SDK: 6GB
  • RAM available for SDK: 256 MB
• App Center (Available Apps for RobustOS Pro)
  • Apps*: Language, RCMS, etc.
  • *Request on demand. For more Apps please visit www.robustel.com
• Power Supply and Consumption
  • Connector: 2-pin 3.5 mm terminal block with lock
  • Input voltage: 9~30V DC
  • Power consumption:
    • Idle: 4W
    • Data link: 25W (peak)
• Physical Characteristics
  • Ingress protection: IP30
  • Housing & Weight: Plastic, 470g
  • Dimensions: 170 x 150 x 35 mm
  • Installations: Desktop, wall mounting, and 35 mm DIN rail mounting, Optional magnetic mounting, the suction iron is a detachable part
  • Operating temperature: -20~+60℃(Without battery), 0 ~ + 45 °C(With battery)
  • Storage temperature: -40 ~ + 85 °C(Without battery), -20 ~ + 35 °C(With battery for long term)
  • Relative humidity: 5~95% RH
• Regulatory and Type Approvals
  • Environmental: RoHS2.0
  • EMI:
    • EN 55032 Conducted Emission class B
    • EN 55032 Radiated Emission class B
  • EMS:
    • EN 61000-4-2 (ESD) Level 2
    • EN 61000-4-3 (RS) Level 3
    • EN 61000-4-4 (EFT) Level 2
    • EN 61000-4-5 (Surge) Level 2
    • EN 61000-4-6 (CS) Level 2