Highlight Features
The R1520 router from Robustel is a versatile 4G router with 5 x Ethernet ports, GPS and E-mark certification for in-vehicle use.
Other hardware features include optically isolated digital inputs and outputs as well as a 10-bit analogue input capable of interfacing directly with sensors in the range of 0 to 24Vdc or 0 to 20mA.
R1520 also has a 2-wire RS485 interface for connection to legacy instruments with full support for Modbus. The RS232 port features RTS/CTS lines so the product can accommodate applications that require hardware handshaking.
Despite being cost-effective, the R1520 is a powerful router with high packet-forwarding capability – way beyond the typical requirements of LTE CAT4 networks. The Linux based Operating System, RobustOS, has been developed entirely in-house which leads to a very high standard of technical support and infrequent firmware updates due to modular nature of the OS. Many unique software innovations are built on top of RobustOS, these include:
RobustVPN – highly flexible hosted VPN service so customers can easily enjoy a “fixed IP router”
RCMS is Robustel’s free router monitoring service that is fully compatible with the R1520. It allows customers to see a location overview of their routers quickly and simply on a map.Features such as data usage, signal strength, current network and much more can then be viewed on a per router. Over-the-air updates are supported for Firmware, router configuration and Apps serving as essential ‘insurance’ if anything was not quite right during deployment.
key features
- Cost-effective & high performance 3G/4G router
- Rugged design with 9 to 36Vdc power
- “Global” 4G version available
- E-mark certification for in vehicle use
- Optically isolated digital IO
- 10-bit Analogue interface for direct sensor connections
- Supports Dual SIMs & Wifi/Ethernet as WAN
- Cellular keep-alive and fast failover
- Extensive range of software “apps” for enhanced functionality
- RobustVPN – hosted service providing a “fixed IP” router
- IPsec/OpenVPN/GRE/L2TP/PPTP/DMVPN supported
Extensive global certifications
Specification
- Cellular Interface
- Number of antennas: 2
- Connector: SMA-K
- SIM: 2 Mini SIM (2 FF)
- Ethernet Interface
- Number of ports: 5 x 10/100 Mbps, 5 LAN by default, can be configured as 1 WAN + 4 LAN
- WAN port: Support 802.3 af & 802.3at PD feature on ETH0
- Magnet isolation protection: 1.5 KV
- WiFi Interface
- Number of antennas: 2
- Connector: RP-SMA-K
- Standards: 802.11 b/g/n, supports AP and Client modes
- Frequency bands: 2.4 GHz
- Security: WEP, WPA, WPA2, WPA3
- Encryption: 64/128 AES, TKIP
- DI/DO
- Type: 1 x DI + 1 x DO, wet contact
- Isolation: 3 KV
- Socket form: 2 * 3-pin 3.5 mm female socket
- Level: 3 to 30V DC = HIGH, 0 to 1 V DC = LOW
- Absolute maximum VDC: 30V DC(DI/DO)
- Absolute maximum ADC: 10mA(DI/DO)
- Analogue Input
- Type: 1 X AI (can be configured as voltage type or current type)
- Voltage input range: 0 to 24 Vdc
- Current input range: 4-20 mA (current-type input requires external resistance, and finally measured by voltage)
- Socket form: 2 * 3-pin 3.5 mm female socket
- Signal definition: AI, AGND
- Serial Port
- Type: 1 x RS232 + 1 x RS485
- Socket form: 2 x 4-pin 3.5 mm female socket
- Signal definitions:
- RS232: RXD, TXD, SGND, RTS, CTS
- RS485: Data+ (A), Data- (B), GND
- Other Interfaces
- 1 x GPS interface (Optional, depending on the cellular module)
- 1 x 480Mbps high-speed USB2.0 interface (Type A, 5V, 500mA)
- Others
- Reset button: 1 x RST
- RTC: External RTC clock, Backup energy storage capacitor can be maintained for 2 days
- LED indicators: 1 x RUN, 1 x MDM, 1 x USR, 1 x RSSI, 1 x WiFi
- Watchdog: Built-in
- Software (Basic features of RobustOS)
- Network protocols: PPPoE, TCP, UDP, DHCP, NAT, DNS, NTP, SMTP, Telnet, VLAN, SSH2, DDNS, etc.
- VPN tunnel: IPsec, OpenVPN, GRE, WireGuard
- Firewall: DMZ, anti-DDoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control
- Remote Management: Web, CLI, SMS
- App Center (Available Apps for RobustOS)
- Apps*: L2TP, PPTP, DMVPN, VRRP, QoS, Captive Portal, WLAN Multi AP, SNMP, Language, RCMS
- *Request on demand. For more Apps please visit www.robustel.com.
- SDK
- Supported programming language: C, C++
- Flash available for SDK: 4 MB
- RAM available for SDK: 64 MB
- Power Supply and Consumption
- Connector: 2 pin 3.5 mm socket with lock
- Input Voltage: 9 ~ 36 VDC
- PoE-PD Voltage: Possibility to power up through ETH0 40 ~ 57 VDC
- Power consumption: Idle: 250 mA@12 V, Data link: 890 mA (peak) @12 V
- Physical Characteristics
- Ingress protection: IP30
- Housing & Weight: Plastic, 250 g
- Dimensions: 105 x 90 x 46 mm
- Installations: Desktop, wall mounting and 35 mm DIN rail mounting
- Regulatory and Type Approvals
- Environmental: RoHS2.0, WEEE
- EMI:
- EN 55032 Conducted Emission Class B
- EN 55032 Radiated Emission Class B
- EMS:
- EN 61000-4-2 (ESD) Contact Level 2, Air Level 3
- EN 61000-4-3 (RS) Level 2
- EN 61000-4-4 (EFT) Level 2
- EN 61000-4-5 (Surge) Level 3
- EN 61000-4-6 (CS) Level 2
- EN 61000-4-11 (DIP) Level 2